Heavy Duty Polyethylene Tarp - Flame Resistant - Full 20 Mil

Standard Features
	Double-Thick Hems: Our hems are heat-sealed instead of stitched for a durable edge. This three-ply hem is ideal for holding grommets in place under tension.
	Black Brass Grommets: Half inch inner diameter grommets are spaced every two feet around our poly tarps, with two in each corner. Made in America out of brass, these grommets will not corrode with outdoor use, and can be relied on for years.

Options for Made-to-Order Tarps:

Grommets with Reinforced Patches: When our standard hem just isn't enough, we can add reinforcement patches to each grommet. This provides an additional layer of security against the grommet ripping out of the fabric. Useful wherever high winds or heavy loads might be, such as scaffolding and water control.

D-Rings with Reinforced Patches: Ideal where extra strong attachment is needed, this edge configuration features reinforced webbing and steel-plated zinc D-rings plus four-layer polyester patches. The 1-1/8-inch D-rings make tie-down easy and hold the tarp securely in place during the most demanding tasks. A must have for use in covering cargo in transit.

Rope in Hem: Whether you need grommets or D-rings, adding a rope to the hem results in an edge with extreme tension resistance. The rope sewn into the middle of the double layer fabric will take the strain of attachment and resist stretching or tearing, saving the fabric in the most grueling of conditions.

Take a look at this quick demonstration of the fire retardant properties of our poly tarp. Though the tarp can be burnt away, it does not itself burn, and it self extinguishes within 2 seconds, once the flame source is removed. To learn more about this, read our article all about fire retardant tarps.